| W1670 Radial
Drill Press |
The radial Drill
Press is one of the most versatile and handy drill presses you can add to
your shop. Between the tilt of the head and the tilt of the table, you can
drill any angle necessary. You can also use it as a horizontal boring
machine. Add to this an incredible swing which allows you to bore to the
center of a workpiece that is 34" wide and you have one of the best values
available in a drill press.
|
| Features: |
|
- Motor: 1/2 HP, 110V
- Overall height: 64 1/2"
- Spindle travel: 3 1/4"
- Number of speeds: 5
- Drill chuck: 5/8"
- Head tilts: 45° left / 90° right
- Range of speeds: 550, 880, 1,520, 2,490, 3,470 RPM
- Swing: 34" maximum
- Table: Precision ground cast iron
- Table size: 12 1/4" dia.
- Table swing: 360°
- Table tilts: 90° in both directions
- Approx. shipping weight: 150 lbs.
|
|
