RF - 31 Mill Drill
|
 |
| Standard Features: |
- Forward and Reverse Switch
- Table Size = 28 3/4" x 8 1/4"
- 16 3/8" Swing
- 12-Speed step pulley
- Table Travel = Longitudinal (18 1/8"), Cross (6 1/4")
- T- Slots =4, size= 5/8" Width
- Spindle/Quill Travel = 5 1/8"
- Spindle Taper = R8 Spindle/ Quill Diameter = 3"
- Spindle to Table (max.)=18"
- Spindle to Column (max.) = 5 1/2"
- Diameter of Column = 4 1/2"
- Machine Dimensions = 42" H X 36" W X 36" D
- Head Swivel = 360°
- Motor & Electrics = 2 HP , 110/220 volt, 1 phase
- Pre-wired 220
- Floor Space Needed = 60" W X 50" D
- Weight = 645 lbs.
- Capacity = Drilling Steel (1 1/4") Drilling Cast Iron (1
1/2") End Mill (3/4"), Face Mill (4")
- 12 Spindle Speeds - 120,190,230,285,370,440,770,1040,1220,1450,
1800,2500
|
|
|
|
Shown with
optional Mill Drill Stand
|
|
| Standard
Accessories: 3 1/2" angle drill press vise,
1/2" drill chuck w/key, drill chuck arbor R8/JT6, 3" face mill cutter,
shell mill arbor, forward/reverse drum switch, and draw bar. |
|
